SONY DXC-D50WS

tom — Sun, 14 Mar 2010 03:34:08 +0000

Signal System NTSC
Image Device 3-CCD, 2/3-Inch, 4:3 Aspect Ratio
Signal-to-Noise Ratio 65 dB
Horizontal Resolution 920 Lines
Sensitivity f/11 @ 2000 Lux
Minimum Illumination 0.5 Lux @ f/1.4 with 36 dB
Vertical Smear (-)140 dB
Built-in Filters 1/4 N.D. (1.5 stops), 1/16 ND (4 stops) 1/64 N.D. (6 stops), 5600K
Speaker None
Viewfinder DXF-51 5-Inch Studio Viewfinder with Mounting Bracket Only
Microphone Yes
Scan Matching Yes, 60.1 Hz to 6000Hz
Memory Card Slot Yes
Tone 1/100 to 1/2000 Seconds
Gain Selection (-)3dB, 0dB, 3 dB, 6dB, 9dB,
12dB, 18dB, 24 dB, 30 dB, 36 dB
Input and Output
Connectors
Composite Video- BNC (x 2 output)
Remote Control- 10-Pin (x 1)
VTR Interface- 76-Pin (x 1)
VTR Interface- 50-Pin (x 1)
Mic Audio- XLR (x 1 input)
Power Requirements 10.5 Volts to 17 Volts DC
Power Consumption 14 Watts
Operating Temperature 32 to 104 degrees F
0 to 40 degrees C
Dimensions (WxHxD) 9 5/8 x 10 1/4 x 19 in.
242 x 258 x 480mm
Weight 4 lbs. 13 oz
2.2 kg

SONY DXC-D35WS

tom — Sun, 14 Mar 2010 03:31:06 +0000

The native 16:9 Power HAD IT (Interline Transfer) CCD's used by the DXC-D35WS perform like FIT (Frame Interline Transfer) chips, minimizing vertical smear to a low -125dB. This allows more freedom when shooting in high light situations. Has a SMPTE Color Bar generator, as well as an Audio Tone generator that supplies a 1kHz Audio reference signal simultaneously with the Color Bar signal. Clear Scan Enables recording of computer monitors without horizontal bands. This is done by precisely selecting a shutter speed to match the scanning frequency of the computer display. The DXC-D35WS has a unique Monitor Output that is particularly useful for remote monitoring applications. Via a BNC connector you can check shooting conditions by displaying a color picture on an external monitor with all operating status indicators. The contrast in the black area of the image can be adjusted by the Black Stretch/Compress control function. Black Stretch emphasizes the contrast in the dark areas, while Black Compress enhances or deepens the darkness. A wide selection of Gain values are available, including: -3dB 0dB +3dB +6dB +9dB +12dB +18dB +24dB The programmable Gain mode allows any three of these values to be assigned to the three-position Low/Mid/High switch. Hyper Gain Boosts Gain to +42dB. Combined with DPR, you have an equivalent of +48dB, with much lower noise level than would normally accompany this much Gain. Just flick a switch to use Hyper Gain and never lose a shooting opportunity. DPR Combines the luminance output of two adjacent pixels. With DPR (Dual Pixel Readout), the light sensitivity is doubled (equivalent to +6dB Gain) without an increase in noise. Two types of Zebra patterns can be set: Zebra 1 can be set within a range of 70 to 90 IRE in 1 IRE increments. Zebra 2 the camera switches to more than 100% video level or Peak White level. In addition, both patterns can be simultaneously displayed. The DXC-D35WS's DynaFit shoulder pad conforms to your shoulder, eliminating the need for forward or backward adjustments. This extremely comfortable shoulder pad helps to provide a comfortable, well-balanced camera, docked with a VCR or a camera adapter. You can superimpose the date and time on the Video signal when the clock switch is on. Though highly reliable, the DXC-D35WS employs a powerful self diagnostic system which informs you in real time of system status and pinpoints the trouble source to help minimize down time in the event of malfunction. A 10-pin Remote Connector designed in accordance with the RS-232 standard allows control from a computer. Menu Driven The DXC-D35WS allows setup changes via superimposed characters on the viewfinder. Depending on the requirement, the menu contents can be selected with the setup (STD/FILE) switch. Tru-Eye Process In conventional RGB analog or digital processing cameras, some non-linear signal processing occurs after gamma correction, such as White Clip and Knee Correction. DynaLatitude Based on the TruEye system, a unique feature called DynaLatitude adaptively manages the contrast of each pixel according to analysis of the video signal level distribution. Continuity Of Image Between Cameras DSP (Digital Signal Processing) allows the camera to maintain a high degree of stability in its video output. Because settings are stored digitally, picture tone can be kept uniform among multiple D35 cameras. Skin Detail with Auto Detection Gives your subjects a smooth complexion with a soft image in the facial area, while maintaining sharpness in other areas. Controls on the camera let you to designate the active skin area and choose the color range. Clean, Detail of Images In Difficult Lighting DSP technology provides exceptionally clean detail images in difficult lighting conditions. The DXC-D35WS provides edges with a natural line and appropriate thickness in areas with extreme dark-to-light. Equipped with two types of docking connectors, a 76-pin Digital connector and the conventional 50-pin. Via the 76-pin:The DXC-D35WS docks directly to the DSR-1 DVCAM recorder, forming the DSR-135WS camcorder. In addition, via the 50-pin connector, the CA-537, CA-327, CA-325A AC operation) and the CA-325B (DC operation) camera adaptors can also be used. To accommodate requests for more automatic functions in a professional level camera such as this, the DXC-D35WS offers features such as Intelligent Auto Iris, EZ Focus and Auto Tracing White Balance. Auto Iris The camera has two Automatic Iris settings, Conventional and Intelligent Auto Iris. This system kicks in when too much light enters the camera for the Auto Iris or Intelligent Auto Iris to handle. EZ Focus Allows you to focus more accurately in difficult situations by opening up the Iris so that depth-of-field is reduced, thereby making the focusing more critical and accurate. EZ Mode Instantly set the camera to a Standard or Custom position.

MidtownVideo.com » Studio

SONY DXC-D50WS

SONY DXC-D35WS