MidtownVideo.com » Wired Microphones

MACKIE SRM450

tom — Sat, 13 Mar 2010 17:29:04 +0000

The Mackie SRM450′s are Active Two-Way Powered Speakers suitable for portable PA applications or on-stage floor monitor use. Comes with Mackie Canvas Speaker Bag.

The rugged, composite-molded enclosure contains two specially matched and electronically protected amplifiers delivering 400-watts of total power to the 12-inch woofer and 1.75-inch compression driver, producing widely-dispersed high-output audio which is both smooth and detailed.

The SRM450 offers multiple fly mounts, a weather-resistant grill, an AC timed turn off function, and a built-in pole mount, all of which add to the system’s flexibility in permanent and portable music applications.

With the SRM450, Mackie has provided electronic time correction, phase alignment and equalization showing why not all “Active” speaker systems are created equal and why tailored electronic control and protection of components adds up to better overall performance.

Active or Passive Active Frequency Response 55Hz to 18kHz Power Capacity 400 Watts Contiunous Maximum Sound Pressure Level (SPL) 124dB Nominal Sensitivity 106dB Impedance 8 ohms Crossover 1.6kHz Low Frequency Driver 12 in. (300mm) Woofer High Frequency Driver 1.75 in. (44.5mm) Enclosure Material Grey polypropylene textured finish Input Connections Balanced/Unbalanced Female XLR Dimensions 26.0 x 15.4 x 14.8 in. (660 x 390 x 376mm) Weight 51.0 lbs (23.2 kg) Specialties Design allows for dual use as floor monitor

ELECTROVOICE 635AB

tom — Sat, 13 Mar 2010 17:26:53 +0000

The Electrovoice 635AB world’s most popular ENG microphone! The 635AB has an omnidirectional polar pattern that prevents the user from sounding “off mic” and practically eliminates plosives and other proximity effects thanks to it’s built in shock mount and pop filter.

Transducer Dynamic Polar Pattern Omnidirectional Frequency Response 80 Hz – 13 kHz Power Requirements None Dynamic, Requires No Phantom or Battery Power Output Impedance 150 Ohms Output Connectors XLR-3M Type Applications Interview and Broadcast Dimensions 5.94 x 1.41″ (151 x 36mm) LxDiameter Weight 6 oz. (170 g)

ELECTROVOICE RE50B

tom — Sat, 13 Mar 2010 17:25:11 +0000

Transducer Dynamic Polar Pattern Omnidirectional Frequency Response 80 Hz – 13 kHz Maximum Input Sound Level not specified by manufacturer Power Requirements None Dynamic, Requires No Phantom or Battery Power Output Impedance 150 Ohms Output Connectors XLR-3M Type Dimensions 7.75 x 1.94″ (197 x 49mm) LxDiameter Weight 9.5 oz. (269 g) Specialties Integral Windscreen Blast Filter with Internal Shock Mounting

SONY ECM-55B

tom — Sat, 13 Mar 2010 17:24:19 +0000

Transducer Electret Condenser Polar Pattern Omnidirectional Frequency Response 30 Hz – 18 kHz Dynamic Range (Typical) > 98 dB Signal-to-Noise Ratio 66 dB, (@ 1 kHz) Maximum Input Sound Level 126 dB, (@ 1 kHz, 1% THD) Power Requirements ‘AA’ Battery (1.5v DC), or Phantom Power (48v) Output Impedance 100 Ohms, (+/-20%, 1 kHz Balanced) Output Connectors XLR-3M Type Pad None Low Frequency Roll-Off None Applications Radio, Television and Broadcast. Dimensions Microphone: .85 x .44″ (21 x 10.6mm) LxDiameter
Power Supply: 5.25 x .82 (131.5 x 20mm) LxW
Cable: 10′ x .09″ (3m x 2.3mm) LxW Weight Microphone: 0.23 oz. (6.5 g)
Power Supply: 4.2 oz. (120 g)

SONY ECM-77B

tom — Sat, 13 Mar 2010 17:22:44 +0000

Transducer Electret Condenser Polar Pattern Omnidirectional Frequency Response 40 Hz – 20 kHz Dynamic Range (Typical) > 90 dB Signal-to-Noise Ratio 64 dB, (@ 1 kHz) Maximum Input Sound Level 120 dB, (@ 1 kHz, 1% THD) Power Requirements ‘AA’ Battery (1.5v DC), or Phantom Power 48v DC Output Impedance 150 Ohms, (+/-20%, 1 kHz Balanced) Output Connectors XLR-3M Type Pad None Low Frequency Roll-Off None Applications Radio, Television and Broadcast. Dimensions Microphone: .5 x .25″ (12.5 x 5.6mm) LxDiameter
Power supply: 5.25 x .82 (131.5 x 20mm) LxW
Cable: 10′ x .09″ (3m x 2.3mm) LxW Weight Microphone: 0.053 oz. (1.5 g)
Power Supply: 4.2 oz. (120 g)